Jump to content
Sign in to follow this  

Units we use daily- pounds, kilograms

Recommended Posts


hopefully I am posting in the right area. I apologize if not.

I am studying the physics iBook "Physics - fundamentals and problem solving" , which is an absolutely amazing book by the way.. i had no idea one could teach through a book with a few videos and get the same results as a full on physics classroom. But anyway, there is a concept I am having trouble grasping. I understand that the force of the gravitational pull is mass times acceleration of gravity but what I'm having trouble with is what we are measuring when we stand on a scale.

I was browsing the net and I got onto the Wikipedia site, http://en.wikipedia.org/wiki/Pound_(mass) , where it says that pounds are units of mass in the imperial system we use here in the US. It also goes on to talk about pound-force and pound-mass and that is where It gets me confused. When I step on a scale, is that scale measuring my mass? or my weight here on earth? Pound force would be weight (mass times gravity) and pound mass would just be mass I suspect?it might be a silly question to most, but I've never heard of this.

and coincidentally, if one pound is .45359 kilograms, does that mean 1 pound-mass or pound-force equals .45359 kg? When they step on a scale with kilograms, is it measuring their weight or mass? In weight lifting, or on truck scales in kilograms, is that the mass or the weight? Thanks!

  • Like 1

Share this post

Link to post
Share on other sites

Ok I did a little more reading on it. I'm starting to understand it now. Apparently you would need to understand the construction of the scale. So if the scale has a spring in it that compresses with more FORCE applied, it is measuring your weight ( mass x acceleration of gravity) but if the reading is showing kilograms..which are a measurement of mass, NOT weight..then the scale is automatically converting the weight that is is reading into mass by dividing the newtons of force it reads from you stepping on it by the acceleration of gravity. So if I step on a scale and it tells me I am 80kg..that means the scale is reading that 784 newtons of force are being applied to the spring and, it is assuming that we are on earth so it divides 784 by earths gravitational acceleration 9.8m/s2 and displays the result of that equation to me.

now the question I have is, does an American scale which displays pounds, display pounds-force or pounds-mass? If it displays force, then theoretically we could take that scale to the moon and weigh ourselves and still get the correct reading in pounds. But if we take a scale which displays kilograms, and "mass" ourselves..because kg is a measurement of mass, not weight.. It would give us the incorrect reading of mass because it is assuming that we are on earth where gravity has a different acceleration

Share this post

Link to post
Share on other sites

Great exploration Tony, and I'm thrilled you're enjoying my book!

The readings on a scale are actually pretty tricky, and you've gotten a great start on understanding it. Let's start with metric scales. Typically metric scales have readings in kilograms, which is an inaccuracy. Scales read the normal force on an object (your weight, or the force of gravity pulls you down toward the center of the earth (mg). The normal force, aka the force of the scale, pushes back on you with the exact same force). So a scale reads force. Technically, it should be giving you a reading in Newtons. However, since most scales are used only on Earth, manufacturers have long since started putting the readings on the scale in kilograms (which, as you say, is the force in newtons divided by 9.8 m/s^2.) If you were to take the scale to the moon, it would be inaccurate, as it would show only 1/6th of your mass on the Earth, and mass doesn't change when you go to the moon. If it read in newtons, however, and showed 1/6th of your weight (in newtons), that would be correct.

An American scale, on the other hand, typically gets it right in that it reads in pounds, which is a unit of force. On the downside, however, in the United States we do a miserable job of measuring mass correctly. We treat pounds (a force) as synonymous with mass, which it is not. In the English system, the correct unit of mass is the slug... and you hardly EVER hear anybody talking about a mass in slugs.

Things get even trickier when you get to scales which accelerate (for example, put a scale in an elevator and watch its readings as it accelerates up and down). I had some students who put together a cool little video about it a few years ago...

Thanks for the great feedback, and the great questions. You're definitely on the right track!!!

Best Wishes,

Dan Fullerton

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

Terms of Use

The pages of APlusPhysics.com, Physics in Action podcasts, and other online media at this site are made available as a service to physics students, instructors, and others. Their use is encouraged and is free of charge. Teachers who wish to use materials either in a classroom demonstration format or as part of an interactive activity/lesson are granted permission (and encouraged) to do so. Linking to information on this site is allowed and encouraged, but content from APlusPhysics may not be made available elsewhere on the Internet without the author's written permission.

Copyright Notice

APlusPhysics.com, Silly Beagle Productions and Physics In Action materials are copyright protected and the author restricts their use to online usage through a live internet connection. Any downloading of files to other storage devices (hard drives, web servers, school servers, CDs, etc.) with the exception of Physics In Action podcast episodes is prohibited. The use of images, text and animations in other projects (including non-profit endeavors) is also prohibited. Requests for permission to use such material on other projects may be submitted in writing to info@aplusphysics.com. Licensing of the content of APlusPhysics.com for other uses may be considered in the future.

  • Create New...