In magnets, there are many rules to need to know. First magnets run from north to south outside the magnet and south to north inside the magnet. Also, magnetic field lines show the flow of these electrons and how they interact with other magnets around. When two magnets are close to each other with both of their closest sides the same, the magnets repel each other and magnet field lines shown in between the magnets are seen repelling away from each other. Also, when two magnets are close to each
When knowing the way magnets act with each other when in close proximity, you can determine many ways other objects act around them. First, if a magnet runs north to south with the north side of the magnet on the left side of a picture and a compass above the magnet, your able to determine the direction of the compass. Since compass's point in the direction of the magnet field line and the magnets' magnetic field lines run from north to south, the compass would be pointing to the right, since it
In the study of waves, there's many different types of waves. First, there are mechanical waves, such as sound, water, and seismic waves, which all require a medium to travel through. In contrast, there are electromagnetic waves, such as visible light and x-rays, which all don't require a medium. Also, when looking at waves, the crest is the top, such as the top of a wave on a beach, and the bottom is called a trough. The length between two crests is known as a wavelength and the amplitude is th
There are many examples of waves in our daily lives, such as water waves, earthquakes, and radiation. Although these might be different types of waves, they all have one thing in common- they all have wave speed. You can determine wave speed with the equation, s=f(lambda). S represents the wave speed, f represents the frequency, and lambda represents the wave length. As an example, if you were looking at a side view of water waves on a beach and the distance between to wave crests was 10 meters,
VIRP tables are the best use to find missing information in either series circuits or parallel circuits. However, there's different rules for each type of circuit. First, in a series circuit, all the currents are the same for the total and each resistor. However, the voltage is the same for all resistors and the total in parallel circuits. Also, in a parallel circuit, to solve for the resistance, the addition of 1/each resistor equals 1/total resistance. Lastly, to find missing information, you
Although I described the importance of Newton's laws in retrospect to baseball, I have learned many more connections between physics and the exciting sport. One example would be the momentum of a baseball after being released by a pitcher. If Tanaka of the New York Yankees, with a .145kg baseball, threw a 42 m/s fastball towards home plate. You could find the momentum of the baseball by using the equation, P=mv. When plugging in the numbers P= (.145kg)(42m/s), you get momentum to equal 6.09 N*m
Although you don't see many examples of springs throughout our daily lives, one big example is the springs for our cars. You can determine the potential energy of a spring by using the equation PEs = (1/2)kx^2. For example, if a car has a spring constant of 30,000N/m and the spring compresses .1m after landing on the ground, you can determine it's potential energy by multiplying. So, (1/2)(30,000N/m)(.1m)^2 = 150J.
When watching a 100m dash, I've never thought about the work and power that was used by the runner until now. If the runner exerted 500N of force over the course of the 12 second run, then you can determine the runners work and power. For solving for work, W = Fd. So, (500N)(100m) = 50,000N*m of work done. Then, to solve the power that was used, P = W/t. So, (50,000N*m)/(12s) = about 4,167 Watts of power used.
I've realized that when looking at a collision, the momentum remains the same in it; however, what we see is the change in velocity. An example would be a 2kg Velcro ball traveling 30m/s that made contact with a 10kg Velcro block initially at rest. When the collision occurred, they stuck together and traveled 5m/s. If you were to look at the momentum before and after the collision, the momentum is the same. Therefore, no matter the type of collision, although the velocity in a collision may vary
By learning about momentum and impulse, I can now see how it relates to car crashes. If a 1000kg car was going 10m/s, and then a 5000kg truck hit it from behind with a force of 2000N for .5 seconds. You can find the car's change in momentum, or impulse by using the equation J=(m)(change in v). First though, you have to find the final velocity of the cart using F=m(change in v). When plugging in: 2000N=(1000kg)(change in v), velocity equals 2m/s. Then plugging in using the first equation: J=(5000
After learning about Newton's 3rd Law, I thought about tug of war. I now know that when someone on one side of the rope is pulling on the rope, the force the person is applying to the rope and the force the rope is applying to the person are equal, no matter how hard the person is pulling. However, although the magnitude of the forces are equal, the direction of them are opposite, since the person is pulling the rope towards him/her and the rope is pulling away from the person.
Also, I look c
One of the sports I like to do during the winter is skiing. When referring to physics, I can think about a lot of relationships comparing both. When skiing down an declined mountain, I know that mg or the weight of gravity is acting on me, as well as the the normal force of the mountain pushing up on me in a perpendicular direction to the mountain. Also, there's a force of friction pushing back me, but not much since I'm accelerating down the mountain. Overall, there's many examples of how newto
Other than baseball, my second favorite sport is football. While watching it or playing, you can notice a lot of physics incorporated into the sport. On of the major examples I can think of is it's relation to angled projectile motion. If you were to say the Giants had one more play to score the game winning touchdown and the quarterback needed to throw a 40 meter touchdown pass, infering that he throws the ball at an angle of 45 degrees. But, threw the ball with an initial velocity of 22 meters
Throughout my life, one of my greatest interests has been baseball. I've been playing it since I was 4 years old and now, I even play it during every season of the year. As I've gained more knowledge about physics, I've been able to connect physics more to baseball. One thing I can apply, is that when a ball it traveling from the moment it leaves contact with the bat, to when it is caught by the outfielder, a v-t graph would have a line starting very positive and then decreasing at a constant ve
The pages of APlusPhysics.com, Physics in Action podcasts, and other online media at this site are made available as a service to physics students, instructors, and others. Their use is encouraged and is free of charge. Teachers who wish to use materials either in a classroom demonstration format or as part of an interactive activity/lesson are granted permission (and encouraged) to do so. Linking to information on this site is allowed and encouraged, but content from APlusPhysics may not be made available elsewhere on the Internet without the author's written permission.
APlusPhysics.com, Silly Beagle Productions and Physics In Action materials are copyright protected and the author restricts their use to online usage through a live internet connection. Any downloading of files to other storage devices (hard drives, web servers, school servers, CDs, etc.) with the exception of Physics In Action podcast episodes is prohibited. The use of images, text and animations in other projects (including non-profit endeavors) is also prohibited. Requests for permission to use such material on other projects may be submitted in writing to email@example.com. Licensing of the content of APlusPhysics.com for other uses may be considered in the future.